Information and/or specifications published here are current as of the date of publication of this document. Tridium, Inc. reserves the right to change or modify specifications without prior notice. The latest product specifications can be found by contacting our corporate headquarters, Richmond, Virginia. Products or features contained herein are covered by one or more U.S. or foreign patents. This document may be copied by parties who are authorized to distribute Tridium products in connection with distribution of those products, subject to the contracts that authorize such distribution. It may not otherwise, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior written consent from Tridium, Inc. Complete confidentiality, trademark, copyright and patent notifications can be found at: http://www.tridium.com/galleries/SignUp/Confidentiality.pdf © 2013 Tridium, Inc.
JACE, Niagara Framework, Niagara AX Framework and the Sedona Framework are trademarks of Tridium, Inc.
This document covers the initial NiagaraAX software installation and configuration for a QNX-based JACE controller, using
either Workbench AX-3.8 or update 1 of Workbench AX-3.7 (denoted as “AX-3.7u1”, that is builds 3.7.1nn, e.g. 3.7.106).
Applicable controllers include the latest models (JACE-3E, JACE-6E, JACE-603 and JACE-645), the JACE-6 and JACE-2 series (JACE-2/6),
the JACE-7 series, the JACE-x02 Express (M2M JACE), as well as any earlier JACE-4/5 series. It assumes that you are an engineer,
technician, or service person who is performing control system installation. All information in this document is also online
in Niagara Workbench help, providing that the docJaceStartup module was installed.
Terms “JACE-603” and “JACE-645” can apply to JACE-403 and JACE-545 controllers that have been outfitted with a “retrofit board”.
If such a controller needs to run Niagara R2 instead of NiagaraAX, please refer to the Retrofit Board Niagara R2 Install & Startup Guide in place of this document.
For physical mounting and wiring details for any JACE controller, please refer to its specific hardware installation document. For example, see the JACE-6 Mounting and Wiring Guide.
This document does not cover station configuration or NiagaraAX components. For more information on these topics, please refer to NiagaraAX online help and the User Guide.
The following main sections are in this document: