Ping

Force a ping message to be sent to the Z-Wave interface.

Activate Scene

Produces a popup Activate Scene dialog, in which you specify a scene to activate (by scene number). This multicasts an activate scene message on the Z-Wave network.

Submit Device Discovery Job

Initiates a Z-Wave device discovery (same as a Discover from the ZWave Device Manager).

Set All On

Broadcasts a Z-Wave “All On” message on the network. Devices that support the All Switch command class respond as defined in their “switchAll” component. For reference details, see CcSwitchAll.

Set All Off

Broadcasts a Z-Wave “All Off” message on the network. Devices that support the All Switch command class respond as defined in their “switchAll” component.

Set Interface Default

Produces a popup confirmation dialog, which if answered “Yes” clears the Z-Wave network topology information from the JACE’s Z-Wave interface (JACE Z-Wave option card or external Z-Wave serial gateway), setting this back to factory defaults.

Use with caution, as this requires replication back from the primary controller again.

Save Device Profiles

Forces saving device profiles back to the station’s file system. See About Device Profiles.

Load Device Profiles

Forces loading of device profiles from the station’s file system.