As an alternative to the procedure below, you can simply copy (drag and drop) a BacnetNetwork from the bacnet palette in Workbench, placing it in the station’s Config, Drivers container. This applies to a BACnet AWS Supervisor station or BACnet OWS Supervisor station too, except in those cases you would copy either a BacnetAwsNetwork (from the bacnetAws palette) or BacnetOwsNetwork (from the bacnetOws palette). Only one Bacnet network of any type is supported.
To add a BacnetNetwork in the station
Use the following procedure to add a BacnetNetwork under the station’s Drivers container.
To add a BacnetNetwork in the station:
-
Double-click the station’s Drivers container, to bring up the Driver Manager.
-
Click the button to bring up the New DeviceNetwork dialog. For more details, see “Driver Manager New and Edit” in the Drivers Guide.
-
Select “
BacnetNetwork,” number to add:1, and click .This brings up a dialog to name the network.
-
Click to add the BacnetNetwork to the station.
You should have a BacnetNetwork named “BacnetNetwork” (or whatever you named it), under your Drivers folder.