Mercury Communicator properties
Mercury Communicator control communication between the NiagaraAX station and the Mercury panel.
This group of properties manages communication between the station and panel(s).
- Transmitter keeps track of messages sent from the station to the Mercury panel.
- Receiver keeps track of the messages received by the station from the Mercury panel.
- Transaction Manager provides no end-user information.
- Poll Scheduler is used to configure point polling.
- Unsolicited Manager provides no end-user information.
- Credentials identify the username and password required by the Mercury panel. They do not refer to the JACE platform or station credentials.
Transmitter
| Type | Value | Description |
|---|---|---|
| Transmission Attempts | Reports the number of attempted transmissions from the panel to the station. | |
| Transmission Count | Reports the number of successful transmissions from the panel to the station. | |
| Retransmission Count | Reports the number of retries attempted when a transmission attempt failed. | |
| Max Retry Count | number of retries | Lets you set the number of times an attempt to transmit will be made before timing out. |
Receiver
| Type | Value | Description |
|---|---|---|
| Response Timeout | hours minutes and seconds (hundredths of seconds) | |
| Number Frames Received | Reports communication with the panel. |
Poll Scheduler
For more information, see Poll Components (module://docDrivers/doc/aPollComponents.html)
| Type | Value | Description |
|---|---|---|
| Poll Enabled | true false |
Turns proxy point polling on and off. Polling is one way to monitor point status. |
| Fast, Normal and Slow Rate | hours, minutes and seconds | Lets you define the speed for each rate. |
| Polling statistics | The remainder of the properties provide statistics on polling performance. For more information about these statistics, see the NiagaraAX Drivers Guide (module://docDrivers/doc/index.html). |