Status, Enabled, Fault Cause, Health, Alarm Source Info

These properties operate the same as for a device object in most drivers. see “Common device components” in the Drivers Guide for general information on these properties.

Master Node L2 Addr

The first “L2” part of a McQuay device’s network address, from 0 to 255 using decimal notation. In the actual device, this address may be expresses in hexadecimal, from 00 to FF.

Slave Node L3 Addr

The second “L3” part of a McQuay device’s network address, from 0 to 255 using decimal notation. In the actual device, this address may be expresses in hexadecimal, from 00 to FF.

Software Ident

The McQuay software IDENT (identity) string of the MicroTech controller, for instance “5060002P”. This is populated when proper communications to the OPM have been established.

Device Status

Descriptive device status string such as “On-Line” or “Off-Line”. If proper communications to the OPM have been established, this should be “On-Line”.

Points

The standard Points device extension (container) for all data items (attributes) in this McQuay device that need to be polled for data.