brandLogo: alt="EnergyLogo"

Using the Advanced Tab – example

---

The following conditions may be addressed using the fields under the Advanced tab.

• A rate of 0.09 per kWh is applicable from the first kWh measured for the billing period through 500 kWh.
• The rate per kWh drops to 0.055 per kWh for all kWh over 500.

To enter data to reflect this rate, do the following:

1. In the Rate Components pane, select a Fee Per Unit rate component.
2. Click the Advanced tab. The Advanced tab fields appear.
3. Type in 0 for the Data Range Min value.
4. Type in 500 for the Data Range Max data value.

   Note: When the “No Upper Limit” check box is selected, there is no upper limit for the rate.

Figure 3-13 Example of Using Multi-tiered Rates.

5. Add another “Fee Per Unit” component to address the 501st (and higher) unit of energy.

Creating a new rate

You need to create the rates before you can use them.

To create a new rate, do the following:

1. Right-click on the rates pane and select “New Rate”.

   The “New Rate” dialog box appears.

Figure 3-14 New Rate dialog box.

2. Type in the name of your new rate and click “OK”. The new rate is added to the list – details need to be added to the rate.