Two ways exist to add a JciN2Network to the station. You can add a JciN2Network while you create a new station using the New Station wizard, or you can manually add a JciN2Network.
To manually add a JciN2Network to the station:
In the Nav tree, double-click the station’s Config > Drivers container. The Driver Manager appears.
Click New. The New DeviceNetwork dialog box appears.
In the Type to Add field, select Jci N2 Network, and in the Number to Add field, enter 1.
Click OK. A dialog box to name the network appears.
If desired, change the name of the network. Leave the Type setting as Jci N2 Network and the Enabled setting to true.
Click OK. The JciN2Network named JciN2Network (or your desired name) now appears in your Drivers folder.
| Johnson Controls, Inc. http://www.johnsoncontrols.com |
| Product Literature: http://cgproducts.johnsoncontrols.com |
| Code No. 12011149 |
| Software Release 5.1 |
| Issued November 18, 2013 |
| Supersedes August 2, 2011 |
Copyright © 2013 Johnson Controls Inc. All rights reserved.