Manual Mode without scheduled Auto-DR events

Even though currently there are no active events configured for this client, Op Mode Value is displaying "moderate", as shown in Figure 20. Event Id and other fields are empty and that indicates active event has a manually configured value.

Figure 20. Active Event - Manually Configured Value

Manual Mode along with scheduled Auto-DR event

Manual mode can be set when there is an associated DR event for the same client.

As you see in the below figure, since the manual mode is set, even though the event DEMO_UNLIMITED_20111011-145910 reaches active state only after 193 seconds [indicated by the current time field], Event Status is marked as "active" and Op Mode Value has a value "Special", as shown in Figure 21.

Figure 21. Active Event Showing Manually configured Value

When the event reaches active state, price absolute and load amount displays the value coming from Auto-DR event. Op Mode Value should display "Normal" as per Auto-DR configuration. Instead, this displays "Special" due to manual configuration, as shown in Figure 22.

Figure 22. Active Event Displaying Both Manual And Auto-DR value

Auto-DR/Manual configuration is done at the client level. This means for the same example stated above, client "a.2" operating under "manual" mode and client "a.1" operating under "Auto-DR" mode, "Active Event" component under Device "a.1"will always display Auto-DR value.