TCP/IP Configuration is the platform view you use configure a remote JACE host’s TCP/IP settings. Typically, you make initial settings when you first commission a JACE for NiagaraAX, where this view is one step in the platform’s Commissioning Wizard.

For more details, see TCP/IP Configuration.

Starting in NiagaraAX build 3.6.44, the TCP/IP Configuration view also applies in a Workbench platform connection to a Niagara R2-configured JACE-603 or JACE-645 controller (retrofit board-equipped JACE-403 or JACE-545 controller). However, this view is not included as a wizard step—you must select it from the main platform view. For more details, refer to the “TCP/IP Configuration” section in the Retrofit Board Niagara R2 Install & Startup Guide.