The Application Director is the platform view that allows you to start, stop, restart, and kill a station on the connected NiagaraAX platform. You also use it to examine standard station output, for troubleshooting and debug purposes.

For more details, see Application Director.

Starting in NiagaraAX build 3.6.44, the Application Director view also applies in a Workbench platform connection to a Niagara R2-configured JACE-603 or JACE-645 controller (retrofit board-equipped JACE-403 or JACE-545 controller). However, in this case there are some differences. For more details, refer to the “Application Director” section in the Retrofit Board Niagara R2 Install & Startup Guide.