TCP/IP DNS fields

If connected to a QNX-based JACE platform, the DNS and gateway settings are also “host-level” parameters in the TCP/IP Configuration view, as shown in Figure 99.

If a Windows-based host, DNS and gateway settings are available under each Interface section. See TCP/IP Interface fields.

Figure 99. Host-level fields for QNX-based platform includes DNS and gateway

The available fields for QNX-based JACE platforms are as follows:

DNS Domain

The TCP/IP Domain Name System (DNS) domain this host belongs to, if used.
IPv4 Gateway

The IP address for the device that forwards packets to other IPv4 networks or subnets. A valid gateway address is required in multi-station (JACE) jobs to allow point discoveries under NiagaraNetworks.
DNSv4 Servers

The IP address for one or more DNS servers (if available), where each can automate associations between hostnames and IPv4 addresses. Included are icon-buttons to Add (to enter IP address of server), Delete, and move Up/Down (to set the DNS search order).
IPv6 Gateway

Available only if a AX-3.6 and later “Hotspot JACE”. The IPv6 address for the device that forwards packets to other IPv6 networks or subnets.
DNSv6 Servers

Available only if a AX-3.6 and later “Hotspot JACE”. The IPv6 address for one or more IPv6 DNS servers (if available), where each can automate associations between hostnames and IPv6 addresses. Included are icon-buttons to Add (to enter IP address of server), Delete, and move Up/Down (to set the DNS search order).