
**1.0.45**
Kit created with for FG series used.
Hardware dependent. 

**1.0.45.1**
Fix issue for Serial Network ; data type issue(word and long data type). 


**1.0.45.3**
Function 15 and Function 16 supported. 
ForceMultiple Coil
ForceMultipleRegister

**1.0.45.4**
Fixed the issue on the (-) negetive index when the component startup.


**1.0.45.5**
Fixed the issue on the driver component startup sequence.
Add on force multiple register into the integer data.

**1.0.45.6**
Add on the reference from serial driver component status.

**1.0.45.8**
-add on the "maxWriteTime" at the Modbus Network.
-fixed the issue on the modbus ping address not response properly.

**1.0.45.33.9**
kit number scheme change. 
kit number (4th segment) now represents FG firmware build number.
Fixed writeException display wrong/delayed result issue.

**1.0.45.33.10**
Add unsigned integer dataType for holding point and input point.

**1.0.45.34.10**
Updated for firmware build 34.

**1.0.45.34.11**
Add interCharDelay property for customize internal RS232 writing delay.
Add faultCause "ModbusPoint limitation exceeded > 32".

**1.0.45.35.11**
Updated for firmware build 35.

**1.0.45.35.12**
Fixed the issue write on up
Add new ModbusHoldingBitGroup point.
Add new ModbusInputBitGroup point.

**1.0.45.36.12**
Updated for firmware build 36.

**1.0.45.37.13**
Updated for firmware build 37.
Remove "interCharDelay" property.

**1.0.45.38.13**
Updated for firmware build 38.

**1.0.45.38.14**
Fixed HoldingBit writeOnStart.
Enable slot address to be viewed on workbench.
Disable point exception fault to be viewed on workbench.

**1.0.45.42.16**
Updated for firmware build 42.
Add support for datatype UINT64, MOD10_64.

**1.0.45.42.17**
Fixed writeOnUp for TCP connection.

**1.0.45.45.20**
Updated update frequency to reduce benchmark and timePerCycle for fast, normal and slow

**1.0.45.45.21**
Updated TCP device to set ip address on enable

**1.0.45.46.22
Updated min setting for interMsgDelay

**1.0.45.47.22**
Updated for firmware build 47.